If you have been driving for a long time, you understand that no one is safe from the suddenly dead battery. This can happen at any time and in any situation. In the middle of a busy road and on an empty highway. Of course, you can start the battery using cables from another battery of a working car. It’s comfortable. But for this you need to wait for this car. And on an empty road, this may not happen soon. In addition, you must have these cables. Or hope that such cables will be with a person who agrees to help you. You can stand for a very long time on the road with a dead battery. You can try to start the car with the new portable jumpstarter now and do it safely.
What is jump starter?
It is a portable battery charger for your car. It looks like a portable phone charger. Includes a power supply and wires with tongs with which you can connect the power supply to the battery terminals.
Advantages of using
You can see many advantages in using such a device. First, it saves time. You don’t have to worry about waiting for a car mechanic or looking for a car that you can connect to with cables. You can be calm and confident that a suddenly dead battery will distract you from your plans.
How to connect the device?
Connect the wires to the jump starter
Find the plus and minus battery terminals on your car.
Observing the polarity, you need to connect the power terminals of the jump starter to the battery. Terminals are named plus and minus. Most often, the positive terminal is red. We connect plus to plus, and minus to minus. Please note that the device has a small light bulb. When no wires are connected, it lights up in red. Once you correctly connect the device to the battery, it will turn green.
If the green light turns on, then you can start car. If, for example, you have reversed the polarity, do not worry. New models of the device are protected and the red light will simply light up, which indicates an incorrect connection.
Go to the car. It is necessary to turn off all consumers of electricity. There are headlights, radio, stove, fan. We do it for the energy goes only to the car starter.
Turn on the parking mode if you have an automatic, if you have the manual – neutral and press the clutch additionally.
We turn on the ignition and try to start it.
If the engine starts poorly, wait up to a minute and try again. If you do not start, perhaps something is wrong with the engine and subsequent attempts will be useless.
After you start the car you need to disconnect the device from the battery. Remove the positive and negative terminals of the jump starter from the battery terminals.
Questions and answers
Can the battery be too dead?
A car stop may occur due to various reasons. This is not always due to the battery. In addition, the battery may go out of tune and not discharge. if you cannot start the battery for a long time, you may need to replace it.
Using such a device is absolutely safe. But remember that this is working with electricity, which means that you must remember the safety rules. Protect your hands before working with wires. In addition, keep a fire extinguisher nearby.
What if I can’t connect?
Check if the terminals are connected correctly or not. Remember that the positive wire must be connected to the positive terminal, and the negative is connected to the negative. If you cannot start the machine, wait a couple of minutes and try again. Check back in a couple of minutes.
What happens if I mess up the terminals?
It’s not so scary. Most devices simply will not turn on, since they have a built-in protective mechanism. Just disconnect the wires from the terminals and connect correctly.
This device is very convenient and easy to use. He can independently connect and start the battery in case of a sudden stop. But, of course, you need to remember the safety rules. Use this device only following the instructions. Read the instructions before using the device. Do you know how to jump start a car? If you can’t start the battery using this device, you may have another breakdown or you need to replace the battery.